Box with multiple gears showing the complexity of how something works relating to Lidar technology

How does Lidar work? (in detail)

3D LiDAR is a complex technology that enables unprecedented Spatial Intelligence. Many engineering choices are possible when building a new device.

This article is a continuation of the basic introduction to LiDAR technology that was provided in the earlier one. Before diving into the more technical details described below, be sure to read it!
Understanding the basics of 3D LiDAR Technology (FB)
Light Detection and Ranging, also known as LiDAR, is a technology for remote sensing that is used to measure distances in an environment (FB)

Simply put, a LiDAR (Light Detection & Ranging) system times how long light takes to reflect off a target that is illuminated by its light source.

What is lidar? Lidar is light detection and ranging. It works by sending laser light pulses to an object and measuring the distance between the 3D sensor and the object

Because it generates its own light, it's called an Active Sensor.

It operates in a variety of environments and contexts, such as at night and in direct sunlight, in contrast to existing 2D-based perception technologies like cameras (a passive sensor).

Compared to another Active Sensor like Radar (Radio Detection & Ranging), the laser light being used in LiDAR allows for much better resolution at distance - cm instead of meters. 
Beam divergence. Lidar vs Radar

The four components of any lidar

Each LiDAR device performs four main functions:

  1. Electron to Photon conversion: A Laser Source generates its own light (it emits photons) when excited with electricity.
  2. Illuminating the Field-of-View: A LiDAR must have a method for spreading the laser light across the zone of interest in order to produce a 3D image.
  3. Detecting the returning light: To convert photons back into electrons and calculate the distance of surrounding objects, a specific detector sensitive to the laser light being emitted is needed.
  4. All the previous operations are controlled by specific Electronics, which includes the computation of the acquired data.

The following sections dive deeper into the three first components.

1. Laser Sources

Since the laser's discovery more than 60 years ago, extensive research has been done on it. Different kinds of lasers are used in various technological fields today.

These include liquid (dye) lasers, semiconductor lasers, gas lasers, solid-state lasers (also known as diode lasers) and fiber lasers.

LiDAR manufacturers use mainly different types of diode lasers (ie. Velodyne, Ouster, Innoviz, Hesai...) and fiber lasers (ie. Luminar, Aeye, Innovusion...)

Click here to learn more about the types of Laser sources

Each of these two techniques emits laser light in specific wavelengths (or regions of the spectra) and has pros and cons:

  1. Diode Lasers working between 800 to 1064nm : although they perform less well than Fiber lasers, they have the advantage of being simpler, smaller, and less expensive. These wavelengths are close to the visible range, so Eye Safety regulations have a greater influence on the amount of energy that they can emit.
  2. and Fiber Lasers working at 1550nm : they are (almost) not constrained by eye safety and can then deliver high power output, which improves signal-to-noise ratio, range, and measurement accuracy. However, fiber lasers are less suitable for integration into small LIDAR systems due to their complexity, and they are much more difficult to manufacture at scale and at an affordable price.
Types of laser wavelengths that lidar sensors use

Types of Lasers

There are mainly two types of Laser Diodes:

  • An edge-emitting laser (EEL) emits light from the substrate's edge. In a semiconductor wafer, a solid-state laser is grown with the optical cavity parallel to the wafer's surface. This was originally used by Velodyne and Quanergy for their mechanical spinning LiDARs.
  • In a VCSEL (Vertical-cavity surface-emitting laser), the light is emitted perpendicular to the mounting surface, as opposed to an EEL, which emits light parallel to the surface. This allows fabricating many lasers on a sigle array and lowers the cost for the same number of points-per-second being delivered. This is used by Ouster among other manufacturers.

In the 1550nm region, Fiber Lasers' LiDAR, such those used by Luminar, Aeye and Innovusion, also use a Diode (in some cases several of them) to "pump" energy into a long fiber, that highly amplifies the signal.

In summary, Fiber Lasers operate much more effectively when price, size, and power consumption are less critical. Even with lower performance, diode-based LiDARs are more suitable for short-term mass production.
It's hard to predict how the market will evolve, because Fiber Laser LiDAR manufacturers are greatly improving the manufacturing techniques and reducing costs, while Diode-based LiDAR makers like Innoviz and Valeo are greatly enhancing their performance!

An important metric of any LiDAR, that is how many laser points per second it's capable of measuring, is directly related to the Laser source performance.

The Repetition Rate is a key performance indicator, measured in points per second. Traditional 2D LiDAR used in Cartography used to emit at some 20 to 50k points per second. The most advanced LiDARs today emit several millions point per second.

Repetition rate & peak power for lidar sensors. Lidar sends laser pulses repeatedly (ToF) over the FoV

The Peak Power means how powerful each laser pulse is, which directly translates into detection range. The narrower the pulse duration or width the more efficient the LiDAR is for a given total energy budget, but also the better the accuracy.

Reflectivity: the amount of energy returned to the detector depends on the type of material and angle of incidence among other factors, is an important piece of information that most LiDAR also provide. 
Reflectivity, the amount of reflected light can be measured and adds valuable information from a lidar scan
For the same detected distance some objects will return much less light than others.

2. Illuminating the Field of View

A device that sends a Laser pulse (or even a train of consecutive laser pulses) and mesures the time it takes to get back it's not a LiDAR, it's called a Range Finder and you can easily find them at affordable prices.

Lidar is not expensive, there are many technologies similar to lidar called range finders with affordable prices

While you can wait 1 or 3 seconds for your range finder to provide distance measurements of a single spot in space, for 3D LiDAR to be useful it must provide:

  • Range and Reflectivity 3D Images (called Frames) at least 10 times per second.
  • Illuminate a significant portion of the surrounding space (the Field-of-View or FoV) with millions of points.

There are different techniques to illuminate the target Field of View.

One method is to progressively illuminate each section of the field of view. In order to scan a different section at different times, the laser beam must be steered using a variety of mechanisms (spinning mirrors, spinning motors, micro-mirrors, etc.).

There are by the way other techniques to steer the laser light without moving parts, like Light Control Metasurface by Lumotive, but these are beyond the scope of this article.

The FoV, field of view, is measured in degrees
This approach requires a fast laser (high repetition rate) but can use a single detector per laser, making it much simpler and smaller.

A different method is to diffuse the laser light so that a single pulse simultaneously illuminates the entire field of view (FoV). A matrix of sensors on the detector side will pick up a particular area of the space.

For Flash Lidar the whole FoV is illuminated at once and a detector matrix is used as a receiver
From the Laser source perspective that means that you require a much slower repetition rate but a much more powerful peak power per pulse. This method also requires the array of detectors to be easy to manufacture at scale.

Repetitive vs. Non-repetitive scanning patterns

The vast majority of LiDAR manufacturers employ a repetitive scanning pattern, which means that each Frame (3D Image) generated by the device will be identical to the previous one (if the sensor is not moving and there are no moving objects in the Field-of-View). This is because each laser pulse will hit the same exact location frame after frame.

Companies like Livox / DJI employ a non-repetitive pattern where the firing angle of each laser beam varies over time. Therefore, even a static lidar in a static scene will eventually produce a much denser image.

Why is this useful? Understanding the "background" (the static portion of the scene) is crucial in many applications to quickly identify moving objects (by definition not part of the background).

Therefore, a Non-Repetitive LiDAR with a much lower repetition rate -and price!- (for example, 250k points per second as opposed to 2 million points per second) can be much more appropriately used in a variety of circumstances and contexts.

3. Detecting the returning light

The methods to detect the light greatly depends on the Laser source being employed: wavelengths below 1064nm can be detected using Silicon-based sensors, which means that they can be affordable and easy to manufacture.

Fiber Lasers at 1550nm require other materials like InGaaS, that are harder to produce at scale.

Another aspect to take into account is the detection method.

The vast majority of LiDAR manufacturers, including Velodyne, Ouster, Luminar, Aeye, and Innoviz, employ what is known as the Direct Time of Flight method (or ToF LiDAR). By directly timing how long it takes the laser light to return to the detector after hitting an object, the distance can be calculated.
Direct Time of Flight (ToF), is employed by many lidar manufacturers such as velodyne, ouster, luminar, aeye, and innoviz

However, a different approach, popularized by companies like Aeva, is quickly becoming mature: FMCW LiDAR (or Frequency Modulated Continuous Wave LiDAR), that uses Coherent detection.

In simple terms, instead of sending pulses over time, FMCW lidar sends out a constant stream of laser light (continuous wave) and modifies its frequency at regular intervals (frequency modulated). This allows to both determine the location of objects and precisely measure their axial relative speed using the Doppler effect.

How does Coherent detection (FMCW) work, sends out constant stream of laser lights.

This technique has many advantages, including immunity to sunlight and other device interference. They typically operate in the 1550nm spectrum, with the advantages related to eye safety that we mentioned for Fiber Lasers.

The power consumption can be far lower (up to 1000 times), which translates into higher ranges and resolution for the same energy.

The FMCW's instantaneous measurement of the axial relative speed of objects is a significant advantage. But it should be noted that these measurements only reflect the relative speed along the axis of the laser beam and not the velocity of the objects.

Conclusion

3D LiDAR is a complex technology that enables unprecedented Spatial Intelligence.

The Laser Source, the Scanning Method, the Detector, and the target Field-of-View are just a few of the engineering choices that can be made when developing a new device.

All of these factors can be combined, and some combinations perform significantly better in particular circumstances and contexts.

For example, a 360º FoV Edge Emitting Laser-based Lidar with medium range and repetitive scanning pattern will be useless in indoor infrastructure applications with narrow aisles to be monitored, while very useful for robotaxis' localisation and mapping in urban environments (...but not in highways!)

Moreover, the output of all these complex LiDAR devices is only a point-cloud (that is the RAW laser data points), whereas what is required in order to leverage the value of 3D Data is ready-to-use actionable insight and information.

Each RAW data language from a lidar has an actionable insight for real-time applications

In addition, choosing which sensors to use, as well as effectively integrating them, let alone combining data from various manufacturers, is challenging due to the lack of any standard and the use of proprietary protocols by each manufacturer.

This is one of the reason the made us build the first Multi-Vendor LiDAR Simulator, you can learn more here:

First Multi-Vendor 3D LiDAR Simulator Unveiled
Outsight has developed a LiDAR simulator for any use case and application, from airports to mobile robotics, smart cities and industrial applications.

Outsight's mission is to create Lidar-based solutions that enable customers and partners to use the best combination of LiDAR models and manufacturers, while abstracting the complexity of the technology with an open and standard data format.

Outsight's Spatial AI software works with any Lidar and Outsight has partnerships with most lidar manufacturers

Learn more about our activity here:

Overview of Outsight
Outsight means the ability to see and understand things clearly: we transform Raw 3D data from different manufacturers into actionable information.

And some of our solutions in the examples below:

LiDAR Manages Increased Airport Traffic
See how and why Airports are increasingly using LiDAR-based software solutions to tackle their biggest challenges, leveraging the unique value of Spatial Intelligence.
LiDAR Software Expands ITS Solutions
With the global rise of 3D sensor demand, LiDAR has never been so accessible and it’s becoming essential for Intelligent Transportation System applications.

Whitepaper download for real-time applications using lidar technology

Related Articles